27.11. Command Line Configuration

If you do not have X installed and you do not want to use the text-based version, you can add a printer via the command line. This method is useful if you want to add a printer from a script or in the %post section of a kickstart installation.

27.11.1. Adding a Local Printer

To add a printer:

redhat-config-printer-tui --Xadd-local options

Options:

--device=node: (Required) The device node to use. For example, /dev/lp0.
--make=make: (Required) The IEEE 1284 MANUFACTURER string or the printer manufacturer's name as in the foomatic database if the manufacturer string is not available.
--model=model: (Required) The IEEE 1284 MODEL string or the printer model listed in the foomatic database if the model string is not available.
--name=name: (Optional) The name to be given to the new queue. If one is not given, a name based on the device node (such as "lp0") will be used.
--as-default: (Optional) Set this as the default queue.

If you are using CUPS as the printing system (the default), after adding the printer, use the following command to start/restart the printer daemon:

service cups restart

If you are using LPRng as the printing system, after adding the printer, use the following command to start/restart the printer daemon:

service lpd restart

27.11.2. Removing a Local Printer

A printer queue can also be removed via the command line.

As root, to remove a printer queue:

redhat-config-printer-tui --Xremove-local options

Options:

--device=node: (Required) The device node used such as /dev/lp0.
--make=make: (Required) The IEEE 1284 MANUFACTURER string, or (if none is available) the printer manufacturer's name as in the foomatic database.
--model=model: (Required) The IEEE 1284 MODEL string, or (if none is available) the printer model as listed in the foomatic database.

If you are using the CUPS printing system (the default), after removing the printer from the Printer Configuration Tool configuration, restart the printer daemon for the changes to take effect:

service cups restart

If you are using the LPRng printing system, after removing the printer from the Printer Configuration Tool configuration, restart the printer daemon for the changes to take effect:

service lpd restart

If you are using CUPS, have removed all printers, and do not want to run the printer daemon anymore, execute the following command:

service cups stop

If you are using LPRng, have removed all printers, and do not want to run the printer daemon anymore, execute the following command:

service lpd stop