If you chose to manually partition using Disk
Druid, refer to the section called Partitioning Your System.
If you chose to manually partition using
fdisk, refer to the section called Partitioning with fdisk.
Automatic partitioning allows you to have some control concerning what data is
removed (if any) from your system. Your options are:
Remove all Linux partitions on this system — select
this option to remove only Linux partitions (partitions created from a previous
Linux installation). This will not remove other partitions you may have on your
hard drive(s).
Remove all partitions on this system — select this
option to remove all partitions on your hard drive(s) (this includes partitions
created by other operating systems such as Windows 95/98/NT/2000).
 | Caution |
|---|
| | If you select this option, all data on the
selected hard drive(s) will be removed by the installation program. Do
not select this option if you have information that you want to keep
on the hard drive(s) where you are installing Red Hat Linux. |
Keep all partitions and use existing free space —
select this option to retain your current data and partitions, assuming you have
enough free space available on your hard drive(s).
Using your mouse, choose the hard drive(s) on which you want Red Hat Linux to be
installed. If you have two or more hard drives, you can choose which hard
drive(s) should contain this installation. Unselected hard drives, and any data
on them, will not be touched.
To review and make any necessary changes to the partitions created by automatic
partitioning, select the Review option.
After selecting Review and clicking
Next to move forward, you will see the partitions created
for you in Disk Druid. You will also be able to make
modifications to these partitions if they do not meet your needs.
Click Next once you have made your selections to proceed.
